Check your cables
Depending on your setup, you may be using one of these methods of connection. Follow the instructions according to your setup:
Direct Ethernet cable
Check the cable hasn’t been damaged and is firmly connected to the back of your YouView box and to the back of your router.
Check both adaptors are plugged in and powered on. Make sure the Ethernet cables are connected firmly to the adapters, your router and your YouView box and all 3 lights on both adapters are on.
We recommend connecting your powerline adapters directly to a wall socket instead of an extension lead for the best results.
Check your Wi-Fi signal is working around the rest of the home. Try using it on a mobile device for example. If you are having issues connecting the TV to Wi-Fi.
Restart your router
The simple old trick of restarting your router can help resolve this issue. Switch it off at the plug for 30 seconds and turn it back on. Give it a minute or two to warm up then check if you’re reconnected.
Please don't leave this page while your router is restarting as you won't have any internet access.
Using Powerline Adapters?
Make sure you switch both adapters off for 30 seconds and then turn them back on. Give them a minute to reset and all the lights will come back on.
Restart your TV
The old “switch it on and off” routine. Overused but it can often help resolve the issue. Press and hold the ⌽ Power button on your remote for 8 seconds, then let go. You're TV will then begin to restart.
Check your network connection status
You may be successfully connected to your router but you may not have Internet access.
Check your connection status:
Press the HOME button on your remote
Scroll down to Settings
Select Advanced settings
Select Network status
Select Check connection
Here you can see if you have internet access.